Agilent 11974Q Mixer

설명

The Agilent 11974Q mixer is preselected from 33 to 50 GHz to eliminate the need for signal identification. The Agilent 11974Q mixer is preselected from 33 to 50 GHz to eliminate the need for signal identification.

Preselection reduces mixer overload from broadband signals and reduces the interaction of local oscillator harmonics with the device under test. True signals can be quickly located, and software development for automated measurements is greatly simplified.

The 11974Q features advanced barium-ferrite technology and comes with a stand-alone power supply. It is especially useful for broadband millimeter signal analysis, electromagnetic interference measurements, and unattended monitoring of millimeter signals.

Agilent 11974 Series preselected millimeter mixers extend the frequency range of the Agilent E4440A/46A PSA Series high-peformance spectrum analyzers, the Agilent E4407B ESA-E Series portable spectrum analyzer, Agilent 8560 E-Series portable spectrum analyzers, the Agilent 8566B spectrum analyzer, and the Agilent 70000 series modular spectrum analyzers.

The 11974Q is not compatible with the N9030A PXA signal analyzer.

Specifications

– Frequency range: 10 MHz to 26.5 GHz
– Input power: -10 dBm to +20 dBm
– Conversion loss: 6 dB at 10 MHz to 26.5 GHz
– Noise figure: 9 dB at 10 MHz to 26.5 GHz
– LO drive power: +10 dBm to +17 dBm
– LO frequency range: 10 MHz to 26.5 GHz
– RF and LO port impedance: 50 ohms
– IF port impedance: 50 ohms
– Maximum RF input power: +27 dBm
– Third-order intercept point: +20 dBm
– Image rejection: 40 dBc
– Spurious response: -60 dBm
– Dimensions: 2.24 in x 6.3 in x 8.62 in (56.9 mm x 160 mm x 219 mm)
– Weight: 2.87 lb (1.3 kg)