Temperature
Accurate temperature measurements are crucial for many industries, including pharmaceuticals, aerospace, health care, and general manufacturing. Micro Precision offers a full range of calibration for all your temperature requirements. Our labs have the equipment and primary standards necessary for accurate measurements including furnaces, baths, resistance bridges, standard resistors, along with standard platinum resistance thermometers (SPRT), and ITS-90 fixed point cells.
Temperature equipment calibrated:
AccuMac, Altek, Ametek, Ashcroft, Cooper-Atkins, Druck, Extech, Fluke Calibration, FLIR, Hart Scientific, Isotech, Techne, Tegam, Transmation, Yokogawa, and more…
Additional Capabilities
Micro Precision also has the capability to calibrate non-contact IR guns, cameras, and optical pyrometers along with temperature simulation where we can simulate using thermocouples or RTDs through Fluke calibrators.
Humidity
Micro Precision has developed the best capabilities for accredited humidity calibration. We can service the most accurate humidity devices with the most consistent and accurate humidity calibrations. Our calibration services are ISO/IEC 17025:2017 accredited with true traceability through NIST. Some of those items we calibrate are Humidity Instruments, Calibrated Chart Recorders, Humidity Meters, Thermo-Hygrometers, Humidity/Temperature Transmitters, Dewpoint Meters, Pressure Sensors, and Process Gauges
Instrument manufacturers calibrated:
Extech, Hanna Instruments, Humidity Meter Calibration, Fluke, Dwyer Instruments, Amprobe, Testo, Amphenol, Cole Parmer, Dickson, GE Panametrics, General Eastern, HART, Vaisala, and more…
Reference Level Calibration
Micro Precision calibrates humidity measurement devices in many of our laboratories across the globe. We also offer reference-level humidity calibration up to 95% RH for items like chart recorders, transmitters, and chambers. We can offer in-lab and on-site calibration for these services.
Life Science - Pharma
Whether your company is ISO/9001 or ISO/13485, we have the broadest range of life science & pharma experience to fulfill your calibration needs.
Get started
Start your request today to have one of our calibration specialists perform an in-lab or on-site calibration service of your life science or pharma equipment.
Life Science & Pharma calibration capabilities:
Autoclave, Balance, Buret, Centrifuge, Chart Recorder, Conductivity Meter, Environmental Chamber, Flow Gage, Fume Hood, Furnace, Hot Plate, Incubator, Infrared Thermometer, Magnehelic Gage, Manometer, Mass, Microscope, pH Meter, Pipette, Pressure Transducer, Process Controller, Pyrometer, RH Monitoring System, RTD, Spectrophotometer, Stability, Tachometer, Temperature Bath, Temperature Controller, Temperature Profiling, Thermo Cycler, Thermocouple, Thermometer, Vacuum, Viscometer, Water Bath, Water System, Weight, WFI System, and more…
Thermodynamics & Chemical Instruments We Calibrate
Micro Precision calibrates a wide range of thermodynamics and chemical measurement instruments, including but not limited to:
- Dew Point Meter
- Humidity Meter
- Probe Meter
- Infrared Thermometer
- Pyrometer
- RTD Probe
- Temperature Meters
- Temperature Probe
- Temperature Sensor
- Thermocouple
- Thermocouple Probe
- Thermohygrometers
- Thermometers
- and more…
Thermometer Calibration - Infrared and Handheld
Infrared thermometer calibration of instruments such as the Fluke VT04, VT04, and 62 series and Extech IR Thermometers. Liquid in Glass and Digital / Handheld Thermometers of all types ranges. Field / on-site measurements available from -195° C to 600° C
RTD Calibration
RTD probes such as the Fluke Calibration 5600 series, and all models and ranges from brands like Thermo Probe, Isotech, and Ametek / Jofra Resistance Thermometry devices (RTDs) calibrated by SPRT (Hart 5699) fixed point or comparison up to 660° C
Thermocouple Calibration
Electrical calibration of thermocouple devices including Types J, K, T, E, R, S, N, and B thermocouples from -270° C to 1,820° C. On-site / field temperature indicator calibrations available
Dry Block, Temperature Oven, Bath, and Furnace Calibration
Dry well / dry block calibration such as the Fluke 9000 & 9100 series & the Ametek / Jofra RTC, CTC, & ITC series. Ice Baths and Liquid calibration baths including models from Fluke Calibration, Techne, and GE / Druck. Thermocouple calibration ovens / furnaces such as the Fluke Calibration 9100 series
Why Choose Micro Precision for Thermodynamics & Chemical Calibration
- ISO/IEC 17025 accredited calibration with full traceability to national and international standards
- Comprehensive temperature and humidity capabilities, from contact and non-contact measurements to environmental instruments
- Global laboratory network with on-site and in-lab calibration services
- Consistent, reliable results supporting audits, compliance, and quality assurance programs
Industries We Support
Micro Precision provides thermodynamics and chemical calibration services to a wide range of industries where accurate temperature and humidity measurements are critical for quality, safety, and compliance, including:
Supporting temperature- and humidity-controlled equipment used in healthcare, laboratories, and medical device environments
Calibration of temperature and humidity instruments used in production, quality control, and process monitoring
Supporting calibration requirements for temperature and environmental measurement equipment used in aviation, aerospace, and defense applications
Calibration services for temperature sensors, probes, and environmental instruments used in testing and manufacturing processes
Supporting regulated calibration needs with traceable and accredited services
Calibration of temperature and environmental monitoring instruments supporting infrastructure and equipment reliability
Calibration services for temperature and humidity measurement devices used in energy generation, transmission, and maintenance operations
Supporting compliance and quality requirements for temperature-controlled storage, processing, and production environments
Calibration of temperature and humidity instruments used in storage, processing, and environmental monitoring applications
Calibration support for temperature and humidity measurement devices used in electronics manufacturing, testing, and controlled environments
Other Capabilities
Micro Precision can perform instrument calibration services on equipment from variety of applications for specific industries and lines of business. If you have a calibration need that is not listed in this area, please contact us.
Laboratory Standards
Calibration laboratory standards are critical for your organization’s most accurate measurements.
Optical
Micro Precision accredited optical, light, and fiber optic calibration lab services.
Electrical
Micro Precision accredited electrical calibration lab services with multimeter, multifunction calibrator, oscilloscope, and power supply capabilities.
RF - Microwave
Micro Precision accredited RF & microwave calibration lab services.
Mechanical & Dimensional
Micro Precision accredited mechanical and dimensional calibration lab services with pressure, torque, force, flow, velocity, and aircraft jack load capabilities.
Semiconductor
ANAB Accredited to ISO/IEC 17025-2017 Accredited semiconductor wafer thickness and precision step hight calibration.
FAQs About Thermodynamics & Chemical
Yes. Micro Precision provides ISO/IEC 17025-accredited thermodynamics and chemical calibration services with full traceability.
Yes. We support calibration for a wide range of temperature and humidity-controlled equipment, depending on instrument type and application.
Yes. Unlike manufacturers who might stop supporting older models to sell you new ones, we support legacy equipment. As long as the unit is functioning mechanically, we can use our optical metrology standards to verify its accuracy and keep it in service longer.
Industries that rely on accurate temperature and humidity measurements commonly require thermodynamics and chemical calibration. These include medical and biomedical, manufacturing, aviation and aerospace, automotive, telecommunications, power and energy, food and beverage, agriculture, and electronics industries. Accredited calibration helps ensure compliance with quality systems, regulatory requirements, and operational reliability.
Request A Quote
"*" indicates required fields
Service Area
If you have any inquiries, recommendations, or simply wish to connect with us, we’d love to hear from you! Please don’t hesitate to reach out to us at
22835 Industrial Place Grass Valley CA 95949
or you can contact us via phone at
(530) 268-1860
or email us at contact@microprecision.com
GET DIRECTIONS
Looking for something else?