KEYSIGHT 4291B RF IMPEDENCE/MATERIAL ANALYZER 001 (Agilent)

Description

The impedance and properties of various electronic components and materials are measured using the extremely sophisticated and adaptable KEYSIGHT 4291B LCR/Impedance meter. This meter has a large frequency range of 1 MHz to 1.8 GHz, enabling accurate measurements over a wide spectrum. The electrical properties of components, such as inductance, capacitance, resistance, and quality factor, may be thoroughly described thanks to its high accuracy and resolution. A user-friendly interface on the KEYSIGHT 4291B makes it simple to use and analyze findings. This LCR/Impedance meter is a crucial tool for engineers and scientists wanting accurate and trustworthy measurements, whether in research and development, production testing, or quality control.

Specifications

– Frequency range: 1 Hz to 1.8 GHz
– Measurement parameters: L, C, R, Z, Y, D, Q, ESR, DCR, and G
– Measurement accuracy: ±0.05% for L, C, R, Z, and ±1% for D, Q, ESR, and DCR
– Measurement speed: Up to 10 ms per point, depending on the measurement parameters
– Test signal level: 5 mV to 1 Vrms, adjustable in 1 mV steps
– Test signal source impedance: 50 Ω
– Test signal frequency resolution: 1 mHz
– Display: 7-inch color LCD with touch screen interface
– Internal memory: Up to 200 test setups and 5000 measurement data points
– Interfaces: GPIB, USB, and LAN for remote control and data transfer
– Dimensions: 426 mm (W) x 177 mm (H) x 425 mm (D)
– Weight: Approximately 9 kg

Agilent 4291B is also available with the following specs and model:

• RF Impedance / Material Analyzer – 1.8GHz

also known or formerly known as:

• Agilent 4291B LCR / Impedance Meter