Mitutoyo Preferred Calibration Providers
Mitutoyo has established itself as one of the leading companies in dimensional metrology, manufacturing precision measuring instruments used across manufacturing, aerospace, automotive, and medical device industries. Micro Precision is a trusted provider of Mitutoyo calibration services, and our certified technicians have been trained to perform calibration and repair on Mitutoyo equipment. We hold ISO/IEC 17025:2017 accreditation, ISO 9000 certification, and ensure NIST traceability on every Mitutoyo calibration we perform.
Importance of Mitutoyo Equipment Calibration
Mitutoyo dimensional measuring instruments require regular calibration because normal use causes gradual measurement drift over time. Calibration confirms that your Mitutoyo equipment continues to perform within its specified tolerances, reduces the risk of measurement errors and premature failure, and supports early detection of problems before they affect production quality.
Why Mitutoyo calibration matters:
- Measurement Accuracy: Calibration verifies that Mitutoyo calipers, micrometers, and gauges continue to measure within their manufacturer specifications, protecting the integrity of every downstream measurement.
- Quality and Compliance: Documented calibration supports compliance with ANSI/NCSL Z540.3 and ISO 9000 quality requirements, keeping your quality management system audit-ready.
- Early Problem Detection: Regular calibration identifies drift or damage before it leads to defective parts or costly rework.
- Extended Equipment Life: Calibration and adjustment services help Mitutoyo instruments perform reliably over a longer service life.
Mitutoyo Equipment we Repair & Calibrate:
Micro Precision calibrates a variety of Mitutoyo dimensional metrology equipment, including:
- Calipers – Vernier, digital, and dial calipers
- Micrometers – Outside, inside, and depth micrometers
- Height Gauges
- Coordinate Measuring Machines (CMMs)
- Optical Comparators
- Vision Measuring Systems
- Surface Roughness Testers
- Dial Test Indicators and Digital Indicators
- Gage Blocks
- Ring Gauges and Surface Plates
- Digital Scale Units
Mitutoyo calibration is part of Micro Precision’s broader dimensional calibration services, or browse all manufacturers in our calibration network.
Calibration Service Levels Offered
| Type of Service | Traceable | Traceable with Data | Accredited (ISO:IEC 17025:2017, Z540.3) |
|---|---|---|---|
| Calibrated to manufacturers specifications traceable to SI Units | |||
| ISO 9000 Compliant | |||
| Calibration certificates, data, maintained on secure web based tool (CDM) | |||
| Detailed calibration certificates and calibration stickers | |||
| Instrument adjustment (if found out of tolerance) | |||
| ANSI/NCSL Z540-1 compliant | |||
| Calibration Data | |||
| Logo from Accreditation body, Expanded Measurement Uncertainty | |||
| ANSI/NCSL Z540.3 compliant |
Please complete our quick Mitutoyo equipment calibration & repair service request form, and a Micro Precision representative will reach out to you same-day during office hours, or within one business day after office hours. (Mon – Friday 8AM – 4PM PST)
Request a Quote
If you have any inquiries, recommendations, or simply wish to connect with us, we’d love to hear from you! Please don’t hesitate to reach out to us.
If you have a specific inquiry for an equipment you can start from Equipment Quote Request Form
"*" indicates required fields
Frequently Asked Questions
Mitutoyo dimensional measuring instruments are commonly calibrated on an annual cycle, consistent with standard practice for precision measuring tools. Equipment used in high-volume production, harsh environments, or safety-critical applications is calibrated more frequently to maintain measurement accuracy and support ISO 9000 quality system requirements.
Mitutoyo caliper calibration compares the instrument’s readings against NIST-traceable reference gage blocks across its full measuring range. Micro Precision technicians document As Found and As Left results and adjust the instrument when it falls outside manufacturer specifications, then issue a certificate of calibration.
Every Mitutoyo calibration performed by Micro Precision includes NIST traceability, meaning measurements are linked through an unbroken chain of comparisons to national reference standards. This traceability is documented on the calibration certificate, giving quality teams the evidence required for internal audits and customer or regulatory review.
A manufacturer calibration certificate confirms an instrument meets factory specifications, while an ISO/IEC 17025:2017 accredited certificate confirms the calibration itself was performed by a laboratory whose competence, reference standards, and documentation have been independently assessed. Micro Precision issues ISO/IEC 17025:2017 accredited certificates for Mitutoyo equipment.
Large or difficult-to-move Mitutoyo equipment, such as coordinate measuring machines and surface plates, can be calibrated on-site at your facility. Smaller instruments, including calipers, micrometers, and height gauges, are typically shipped to a Micro Precision laboratory for calibration under controlled environmental conditions.
Micro Precision offers standard and faster turnaround options for Mitutoyo calibration, and exact timing depends on the instrument type, service level, and current lab volume. Request a calibration quote for a turnaround estimate specific to your Mitutoyo equipment and service level.
Aerospace, automotive, medical device, and general manufacturing industries commonly require ISO/IEC 17025:2017 accredited calibration for dimensional measuring equipment like Mitutoyo calipers, micrometers, and CMMs. Accredited calibration provides the documented traceability these industries need to satisfy internal quality systems and customer or regulatory audits.