The Trusted Source for Amprobe Calibration
Micro Precision provides Amprobe calibration services for multimeters, clamp meters, insulation testers, and other Amprobe test equipment through an ISO/IEC 17025:2017 accredited, NIST-traceable lab network spanning more than 50 locations worldwide. Amprobe’s clamp meters, multimeters, and insulation testers are widely used in electrical contracting, HVAC, and industrial maintenance, where measurement accuracy and safety depend on consistent calibration.
Micro Precision’s accredited labs and skilled technicians calibrate and repair Amprobe equipment to restore optimal performance. Choosing a NIST-traceable, ISO/IEC 17025:2017 accredited calibration provider gives you confidence in your Amprobe equipment’s accuracy, supports your quality system, and protects the safety of your operation.
Why Amprobe Calibration Matters
Amprobe calibration keeps clamp meters, multimeters, and insulation testers within manufacturer-specified accuracy limits, supporting compliance with ANSI/NCSL Z540.3 and ISO 10012 measurement management requirements. Calibration intervals, set according to usage and manufacturer recommendations, prevent measurement drift that can compromise safety inspections, quality audits, and regulatory reporting.
Keeping your Amprobe equipment calibrated and repaired is critical for accurate and reliable results. Over time, wear and tear affect tool performance, compromising measurements and safety. Calibration confirms your Amprobe tools deliver the readings your quality system requires, while timely repairs prevent minor issues from becoming major replacements and extend the life of your equipment. Properly calibrated tools support efficient, accurate work across electrical calibration services programs.
Amprobe Calibration Options
Micro Precision provides Amprobe calibration through in-lab service at any of its 50+ ISO/IEC 17025:2017 accredited locations, or through on-site field calibration at your facility. Standard and rush turnaround options are available to match your production schedule and audit deadlines. On-site calibration is well suited to Amprobe clamp meters, insulation testers, and other tools that are impractical to remove from active use.
Some of the Amprobe instruments we calibrate:
- Multimeters
- Clamp Meters
- Wire Tracers & Underground Locators
- Ground Resistance & Insulation Testers
- Voltage Testers & Circuit Tracers
- Environmental Testers
- Power Quality Analyzers
- Earth Ground Testers
Micro Precision also calibrates a variety of other Amprobe models not listed here. Technicians who also rely on Fluke test tools can view our Fluke calibration services, and insulation and ground resistance equipment from other brands is covered by our Megger calibration services. To see the full range of manufacturers Micro Precision supports, browse all manufacturers.
Calibration Service Levels Offered
| Type of Service | Traceable | Traceable with Data | Accredited (ISO:IEC 17025:2017, Z540.3) |
|---|---|---|---|
| Calibrated to manufacturers specifications traceable to SI Units | |||
| ISO 9000 Compliant | |||
| Calibration certificates, data, maintained on secure web based tool (CDM) | |||
| Detailed calibration certificates and calibration stickers | |||
| Instrument adjustment (if found out of tolerance) | |||
| ANSI/NCSL Z540-1 compliant | |||
| Calibration Data | |||
| Logo from Accreditation body, Expanded Measurement Uncertainty | |||
| ANSI/NCSL Z540.3 compliant |
Your Trusted Amprobe Calibration Provider
For peak Amprobe tool performance, Micro Precision is your calibration and repair partner. Our technicians use state-of-the-art facilities to provide full-service, NIST-traceable Amprobe calibration, from basic calibration to complex repairs, available both in-lab and on-site. Our labs are ISO/IEC 17025:2017 accredited, and every completed job includes calibration certificate documentation for your quality records. Choose Micro Precision’s instrument calibration services for reliable Amprobe calibration and keep your test equipment running at peak performance.
Please complete our quick Amprobe equipment calibration & repair service request form, and a Micro Precision representative will reach out to you same-day during office hours, or within one business day after office hours. (Mon – Friday 8AM – 4PM PST)
Request a Quote
If you have any inquiries, recommendations, or simply wish to connect with us, we’d love to hear from you! Please don’t hesitate to reach out to us.
If you have a specific inquiry for an equipment you can start from Equipment Quote Request Form
"*" indicates required fields
Frequently Asked Questions
Amprobe test tool calibration frequency depends on usage intensity, environmental conditions, and the manufacturer’s recommended interval. Micro Precision reviews each instrument’s calibration history and application to recommend an appropriate schedule. Consistent calibration intervals support ANSI/NCSL Z540.3 compliance and keep measurement uncertainty within your quality system’s requirements.
Fill out Micro Precision’s equipment calibration request form to start Amprobe multimeter calibration. Micro Precision receives the instrument, tests it against NIST-traceable reference standards, adjusts it if it falls outside tolerance, issues a calibration certificate, and returns the multimeter ready for use. In-lab and on-site scheduling options are both available.
Amprobe calibration matters for compliance and safety because uncalibrated test tools can produce inaccurate voltage, current, or resistance readings that put personnel and equipment at risk. ISO/IEC 17025:2017 accredited calibration, aligned with ANSI/NCSL Z540.3 and ISO 10012, documents that an Amprobe instrument meets traceable accuracy requirements for audits and safety inspections.
Amprobe tools do not have to be sent back to the manufacturer for calibration. Micro Precision, an ISO/IEC 17025:2017 accredited third-party calibration lab, calibrates Amprobe multimeters, clamp meters, and insulation testers with NIST-traceable reference standards, providing the same accredited documentation quality managers require without OEM turnaround delays.
An Amprobe calibration certificate from Micro Precision documents the instrument tested, the calibration date, the reference standards used, measured results, and NIST traceability. Accredited-level certificates also include the accreditation body logo and expanded measurement uncertainty, giving quality managers the documentation needed for ISO/IEC 17025:2017 audit records.
Amprobe clamp meters and insulation testers can be calibrated on-site at your facility as well as in Micro Precision’s accredited labs. On-site calibration is well suited for equipment that is difficult to remove from service, while in-lab calibration through Micro Precision’s 50+ location network offers additional service-level options.